What are the hardware welding tools? Hot air gun tool

What are the hardware welding tools? The following is a hot air gun supplier:

1) solder

Soldering materials are indispensable in the production and maintenance of electronic industry. Generally speaking, solder materials commonly include tin lead alloy solder, antimony solder, cadmium solder, silver solder, copper solder.

The main products of solder are divided into three categories: solder wire, solder bar and solder paste. It can be applied to all kinds of electronic welding, which is suitable for manual welding, wave soldering, reflow soldering and other processes. Category: lead solder, lead-free solder

2) stripping pliers

Insulating layer for rapid stripping of head of electric wire

3) nippers

Used to cut off spare parts, components, extra pins, wires or plastics

4) iron

The soldering iron is a necessary tool for soldering. It can be used to raise the temperature to melt the tin.

The soldering iron is composed of a heating core, an insulated handle and a soldering iron head. After passing through the electric current, the resistance heating element generates heat. A portable gas heating iron canister, usually by catalytic heater instead of flame.

Iron is often used in electronic assembly on the installation, maintenance and small production work. Large scale production lines use other welding methods. The big iron can be used for welding of sheet metal objects.

Iron can be divided into low temperature soldering iron, high temperature and constant temperature soldering iron. Prices vary according to performance.

5) tin

Tin, is a small, temperature controlled oven or container, bell, tin and iron head for tin wire. With molten tin, tin to dip a small circuit board, wire, tin tin soldering iron head and other special work. Tin must have reliable temperature control of small scale work is particularly useful in requirements.

6) suction line

Disassembly and welding.

Tin suction line is a special maintenance tool, which greatly reduces the rework / repair time of electronic products, and greatly reduces the risk of thermal damage to the circuit board. The precision geometric design ensures maximum surface tension and tin absorption.

7) flux

In the welding process can help and promote the welding process, and has protective effect, prevent oxidation reaction of chemical substances. Flux: 1. kinds of water soluble flux 2. flux rosin flux 3.

8) water

Used for cleaning and wetting sponge.

9) microscope

For surface mount components, welding under microscope is especially helpful.

10) circuit board clamp

Used to fix the circuit board to prevent looseness.

11) tin suctioner

For disassembly and welding.

There is a suction tool for electrical repair, solder melting removing pads to collect electronic components. There are two kinds of manual and electric. The maintenance disassembly requires the use of tin suctioner, especially the large scale integrated circuit, the more difficult the demolition, demolition is not easy to damage the printed circuit board, resulting in unnecessary losses. Tin suctioner simple is the manual, and most plastic products, its head due to contact with high temperature, therefore usually adopts high temperature resistant plastic.

12) hot air gun

Hot air gun is mainly used to heat the resistance wire of the gun core to blow out the hot air to weld and pick up the components of the tool. According to the working principle of the hot air gun, the main part of the control circuit of the hot air gun should include the temperature signal amplifying circuit, the comparison circuit, the SCR control circuit, the sensor and the wind control circuit, etc.. The temperature of hot air gun is usually between 100 degree C and 550 degree C, and the individual can reach 760 degree C.

Shenzhen Dezhi High Tech Co. Ltd specializes in hot air guns, hardware accessories, electronic tools industry, is a research and development, production and sales of air gun, hardware tool manufacturers, is a national high-tech enterprises and high-tech enterprises in Shenzhen city. Our profession is worth your trust. Telephone number: 0755 - 27872999!